Bolt it right on to your Vespa Moped. Use it to replace a leaky old carb, or to get a bit more power from your vintage moped.


Works wonderfully with speed kits, and expansion chambers.

Barrel sizes 13 mm
Choke sizes 13
Idle circuit drawing mixture from main jet
Flat throttle slide
Semi-automatic strangler starting system
13mm clamp-on connection to engine
Comes with #66 Main Jet

This carb uses 5mm jets.

For tuning tips, check out Garage. The worlds largest moped tuning database. Here are the list of the top builds in garage using this jet. Use Garage as a guide to what jet you need.

Some Dellorto SHA Builds and the Jets they are using. SHA Builds

Technodatalogical Tip! All SHA carbs come with a bushing in the clamp mount. This carb come a bushing that as 18mm outer diameter and a 16mm inner dia. If you're using this carb on something other than a Vespa moped you may want to measure the outer diameter of your intake to make sure it matches 16mm . Yup.