Race crank for your Tomos moped! A3, A35, and A55.

Full on race, with Aluminum stuffing for an extra boost. Oiler slots galore, and precision machining make this a must for anyone who really wants to flex with their Tomos.

Includes everything you see here:

Notice it doesn't come with a roller bearing for the piston pin. You just reuse your old one!

Made for us!

Tomos A3:

So, this crank lets you convert your Tomos A3 over to a Tomos A35 easy as pie. Fits right in there, and makes it possible to install a Tomos A35 kit. The big hurdle in the past was the 10mm wrist pin that came on the A3. The A35 has a 12mm pin. Swap the crank, and you can put any kit on you want. The catch, and there is always a catch, is that you will also have to upgrade your clutches to an A35 setup as well.

Tomos A3: So, this crank lets you convert your Tomos A3 over to a Tomos A35 easy as pie. Fits right in there, and makes it possible to install a Tomos A35 kit. The big hurdle in the past was the 10mm wrist pin that came on the A3. The A35 has a 12mm pin. Swap the crank, and you can put any kit on you want. The catch, and there is always a catch, is that you will also have to upgrade your clutches to an A35 setup as well.

If you want to see other folks using this rad crank, check out these builds on Garage.  The worlds largest moped tuning database.