|
|
|
|
|
|
Motobecane Flywheel Nut - Left Hand Thread
|
In Stock
|
|
|
Make sure you know which nut you need. This nut is typically for stock bikes. But, mopeds are tricky so check first. Or order both and see which works for you.
M11 x 1mm pitch reverse threaded
|
|
|
|
|
|
|
|
|
|
6mm Everything Locking Nut
|
|
In Stock
|
|
|
This is the most common nut found on your moped. It is called 6mm, or M6 in Metric speak. If you have a 10mm wrench or socket, and it fits the nut you need, this is it. This is the locking version of the common 6mm nut.
Used on exhaust studs, head bolts, and everywhere else.
Quantity discounts after 5. Keep adding them to your cart and watch the prices fall.
|
|
|
|
|
|
|
|
|
|
Puch Tomos Honda EBR Fork Nut
|
|
In Stock
|
|
|
Standard nut that fits Puch, Tomos, Honda Hobbit and EBR forks.
|
|
|
|
|
|
|
|
|
|
M4 Nut
|
|
In Stock
|
|
|
M4 nut. Goes anywhere you need one.
|
|
|
|
|
|
|
|
|
|
Puch Sachs Peugeot Derbi Flywheel Nut
|
|
In Stock
|
|
|
Basically a universal flywheel nut. If your nut has a flange on it, maybe use a washer with this one.
Fits, Batavus, Peugeot, Sachs, Puch, Tomos, and many others. Measure the OD of the threaded part of your crank to verify.
|
|
|
|
|
|
|
|
|
|
NOS Puch Flywheel / Clutch Nut
|
|
In Stock
|
|
|
Nut with built in washer for holding on your flywheel. Also works for holding on your clutch.
Will work with many other brands for their flywheels as well.
|
|
|
|
|
|
|
|
|
|
M11 11mm Axle Nut
|
|
In Stock
|
|
|
Axle nut.
Fits anywhere else you might need a 10mm nut as well.
11mm x 1mm Thread
|
|
|
|
|
|
|
|
|
|
Puch Tomos EBR Triple Tree Nut
|
|
In Stock
|
|
|
Triple Tree Nut.
Works with EBR forks, Puch, and Tomos forks.
|
|
|
|
|
|
|
|
|
|
M6 Tall Coupler Head Nut
|
|
In Stock
|
|
|
These are really tall 6mm nuts, great for using as a coupling nut, or they work well as a head, exhaust, or intake nut.
Sold Individually.
|
|
|
|
|
|
|
|
|
|
Franco Morini M8 Ignition Magneto Nut
|
|
In Stock
|
|
|
Franco Morini ignition nut.
M8 x 15mm
|
|
|
|
|
|
|
|
|
|
Locking M7 Nuts
|
|
In Stock
|
|
|
These nuts are oblong on the end. A neat oem trick to make them lock nuts. Works great has head nuts.
Sold individually.
|
|
|
|
|
|
|
|
|
|
Minarelli Clutch Nut -Reverse Thread
|
|
In Stock
|
|
|
Minarelli clutch nut, reverse threaded.
|
|
|
|
|
|
|
|
|
|
M7 Nut
|
|
In Stock
|
|
|
m7 nuts. perfect for tomos cylinder studs and more!
Sold individually.
|
|
|
|
|
|
|
|
|
|
SINGLE Brass Tall Exhaust Nut
|
|
In Stock
|
|
|
Perfect for installing a performance exhaust, because they are taller and softer than steel nuts.
Sold as a pair.
|
|
|
|
|
|
|
|
|
|
6mmLong Brass Exhaust Nut
|
|
In Stock
|
|
|
Long brass exhaust nuts for m6 exhaust studs. If you have a moped with
m6 exhaust studs, then these are for you. Get those old stripped m6 nuts
off of there and shine up your old moped with these new brass nuts.
These are sold individually, so if you need two buy two.
|
|
|
|
|
|
|
|
|
|
Motobecane Flywheel Nut - Right Hand Thread
|
|
In Stock
|
|
|
Make sure you know which nut you need.
Nut typically found on aftermarket cranks, but still possibly the nut that came on your stock crank. Check if you have a regular thread or reverse thread.
M11 x 1mm Thread
|
|
|
|
|
|
|
|
|
|
Malossi M7 Head Nut Kit
|
|
In Stock
|
|
|
Super convenient head nut pack. It will work wherever you need M7 nuts. Common M7 head nut using mopeds are: Derbi, Tomos, Motobecane, Vespa, and Kinetic.
Made in Italy!
|
|
|
|
|
|
|
|
|
|
Motobecane Variator Nut
|
|
In Stock
|
|
|
The nut that holds on your Motobecane Variator.
|
|
|
|
|
|
|
|
|
|
25.5mm Fork Nut for Garelli, Vespa Bravo, Vespa Ciao, Honda Hobbit & more
|
|
In Stock
|
|
|
Top fork nut for Garelli, Vespa Bravo/Ciao, Honda Hobbit, General, Lazer, Batavus, Trac, & Cimatti. These all have 25.5mm threading.
|
|
|
|
|
|
|
|
|
|
Cable Adjuster with Nut
|
|
In Stock
|
|
|
Cable adjuster with nut.
For use with any cable up to 7mm in diameter
m6 x 25mm
|
|
|
|
|
|
|
|
|
|
Tomos Oil Pump Nut
|
|
In Stock
|
|
|
This is a magneto nut that also has a slot for your oil pump. OEM Tomos parts!
|
|
|
|
|
|
|
|
|
|
Peugeot Polini Flywheel Nut
|
|
In Stock
|
|
|
This nut is great for fitting in those deep variators.
|
|
|
|
|
|
|
|
|
|
M10 10mm Axle Nut
|
|
(Out of Stock)
|
|
|
Axle nut. It is a 10mm nut, but fits the 12mm Tomos Axle.
Fits anywhere else you might need a 10mm nut as well.
10mm x 1mm Thread
|
|
|
|
|
|
|
|
|
|
OEM Minarelli Flywheel Nut
|
|
(Out of Stock)
|
|
|
New Old Stock Minarelli V1 or VL1 flywheel nut.
|
|
|
|
|
|
|
|
|
|
Brass Tall Exhaust Nuts
|
|
|
Perfect for installing a performance exhaust, because they are taller and softer than steel nuts.
Sold as a pair.
|
|
|
|
|
|
|
|
|
|
metric flat washers
|
|
|
metric flat washer by the piece
|
|
|
|
|
|
|
|
|
|
any metric nut
|
|
|
any metric nut you need.
|
|
|
|
