|
|
|
|
|
|
Sedona 14in Moped Inner Tube
|
In Stock
|
|
|
No-Ped Tube
|
|
|
|
|
|
|
|
|
|
12mm Rear Axle -Sealed Bearing
|
|
In Stock
|
|
|
Sprint, LX, and many more. This is the stock axle for Tomos bikes. You can use this anywhere you need a 12mm Sealed bearing axle.
|
|
|
|
|
|
|
|
|
|
Sedona 16in Moped Inner Tube
|
|
In Stock
|
|
|
This is a high quality Sedona brand motorcycle or moped tube.
Made for motorcycles, this is the high end of quality for tubes. Talcum powder coated for easy installation.
|
|
|
|
|
|
|
|
|
|
Puch Pedal Chain Tension Arm
|
|
In Stock
|
|
|
Replacement pedal chain tensioner for Puch mopeds. This is a high quality aftermarket replacement for the part that seems to always break on older Puch mopeds.
|
|
|
|
|
|
|
|
|
|
Honda Rear Brake Shoes
|
|
In Stock
|
|
|
Honda PA50, Camino, and Hobbit rear brake shoes. Not sure if it fits the front.
For spoked wheels only.
|
|
|
|
|
|
|
|
|
|
17in Moped Inner Tube
|
|
In Stock
|
|
|
Universal moped inner tube. This is our house brand tube, it comes straight from the factory to our warehouse, so we are able to offer them at a discounted price.
The tubes are marked 17 x 2.5in, but will fit a range of 17inch tires from 2.25 inches wide all the way to 2.75.
These thick tubes are really nice and harder to puncture with your screw drivers or tire irons then other cheapo tubes out there.
You would see this tube on all Puch Maxi, Magnum, and Newport mopeds. Also was used on the vast majority of Peugeot, and Motobecane mopeds. The most popular size there is pretty much.
|
|
|
|
|
|
|
|
|
|
18in Moped Inner Tube
|
|
In Stock
|
|
|
Universal moped inner tube. This is our house brand tube, it comes straight from the factory to our warehouse, so we are able to offer them at a discounted price.
These tubes will fit 2.25 - 2.50 x 18
These thick tubes are really nice and harder to puncture with your screw drivers or tire irons then other cheapo tubes out there.
|
|
|
|
|
|
|
|
|
|
Puch Motobecane and Peugeot Moped Brake Shoes
|
|
In Stock
|
|
|
Perfect brake shoes for perfect stopping. Sometimes brakes get worn down enough than no amount of sanding can bring them back. These are for your Spoke, and 5 Star Puch wheels. Fits Motobecane, Sachs, Batavus, and Peugeot spoke rims as well. Basically all Lelue spoke rims use these.
Little Tip:
If your easy-adjust at the controls are all the way out, chances are your shoes are too far worn down, and should be replaced.
|
|
|
|
|
|
|
|
|
|
Puch Peugeot Lelue Front Hub
|
|
In Stock
|
|
|
Complete front hub for any bike that has a Lelue 36 hole front wheel.
Sealed bearing set up.
|
|
|
|
|
|
|
|
|
|
6001.C3 Bearing
|
|
In Stock
|
|
|
Replacement wheel bearing for Puch Snowflakes. You will need a 1mm shim to make it fit. Also can convert a 5 Star wheel to sealed bearings with a thin shim.
Also fits some Puch ZA50 Transmission covers.
12x28x8mm
|
|
|
|
|
|
|
|
|
|
Tomos A35 Wheel Bearing
|
|
In Stock
|
|
|
Sealed bearing for Tomos A35 mag wheel. You will need 2 bearings per wheel for restoring your Tomos moped to greatness.
measures 12mmx32mmx10mm
|
|
|
|
|
|
|
|
|
|
17 inches Aluminium Race Rim - Black
|
|
In Stock
|
|
|
Light alloy rims that fits 28 hole Lelue hubs. You can finally build a totally brand new wheel, from quality components.
Count the wholes on your hub. Typically, Motobecane and Puch are 36hole. Peugeot is typically 28hole. You can always upgrade to these new front hubs or the rear.
Aluminum Rim, lighter and stronger than that vintage junk you are currently racing around on.
|
|
|
|
|
|
|
|
|
|
17in Narrow Moped Inner Tube
|
|
In Stock
|
|
|
Universal moped inner tube. This is our house brand tube, it comes straight from the factory to our warehouse, so we are able to offer them at a discounted price.
The tubes are marked 17 x 2in, but will fit a range of 17inch tires from 2.0 inches wide all the way to 2.25.
These thick tubes are really nice and harder to puncture with your screw drivers or tire irons than other cheapo tubes out there.
You must use these tubes if running 2\" wide tires like the IRC NR58 or 2\" width stock tires, as regular tubes will bunch up inside the tire.
|
|
|
|
|
|
|
|
|
|
Sava MC11 17 x 2.25in Tire
|
|
In Stock
|
|
|
Sava MC11 17 x 2.25in Tire
|
|
|
|
|
|
|
|
|
|
Vee Rubber 14 x 2.25in Tire
|
|
In Stock
|
|
|
Vee Rubber tire for your small wheeled moped.
Great for that Puch Dart! And or most Asian NoPeds.
14in X 2.25in.
|
|
|
|
|
|
|
|
|
|
Lelue Wheel Spoke
|
|
In Stock
|
|
|
This is one single spoke for your Puch, Peugeot, Sachs, or Motobecane with Lelue wheels. Sold each.
|
|
|
|
|
|
|
|
|
|
Tomos A35 A55 Rear Axle Kit
|
|
In Stock
|
|
|
Rear axle kit for your Tomos A35 A55 moped. Includes one axle, two nuts, and a spacer.
Axle is 165mm long. Threads are 11mm, and in the middle it is 12mm.
|
|
|
|
|
|
|
|
|
|
M11 11mm Axle Nut
|
|
In Stock
|
|
|
Axle nut.
Fits anywhere else you might need a 10mm nut as well.
11mm x 1mm Thread
|
|
|
|
|
|
|
|
|
|
Puch Rear Wheel Axle Adjuster Set
|
|
In Stock
|
|
|
Keep your Puch wheel adjusted. Sold as a set of two.
|
|
|
|
|
|
|
|
|
|
House Brand GP Tire -17 x 2.25
|
|
In Stock
|
|
|
Our House Brand Tire. Cheap, sticky, and great!
This would go great on a Puch, or Honda Hobbit, or anything that needs 17in wheels.
*not eligible for free shipping.
|
|
|
|
|
|
|
|
|
|
17in Moped Inner Tube -Deluxe Version
|
|
In Stock
|
|
|
This is a high quality brand motorcycle or moped tube.
Made for motorcycles, this is the high end of quality for tubes. Talcum powder coated for easy installation.
This is for 17 x 2.25 to 2.5in tires. The most commonly used size tube.
|
|
|
|
|
|
|
|
|
|
Tomos Disc Brake Pads
|
|
In Stock
|
|
|
Used on the Revival, Arrow, and Streetmate.
|
|
|
|
|
|
|
|
|
|
16in Moped Inner Tube
|
|
In Stock
|
|
|
Universal moped inner tube. This is our house brand tube, it comes
straight from the factory to our warehouse, so we are able to offer them
at a discounted price.
The tubes are marked 16 x 2.5", but will fit a range of 16" tires from 2.25" inches wide all the way to 2.75".
These
thick tubes are really nice and harder to puncture with your screw
drivers or tire irons then other cheapo tubes out there.
|
|
|
|
|
|
|
|
|
|
High quality 16in Moped Inner Tube -Large Edition
|
|
In Stock
|
|
|
This is for 16 x 3.00 - 3.50 tires. Commonly found on Tomos Revival, and Streetmate mopeds.
|
|
|
|
|
|
|
|
|
|
Tomos A3 Brake Shoes
|
|
In Stock
|
|
|
Perfect brake shoes for perfect stopping. Sometimes brakes get worn down enough than no amount of sanding can bring them back. Little Tip: If your easy-adjust at the controls are all the way out, chances are your shoes are too far worn down, and should be replaced.
|
|
|
|
|
|
|
|
|
|
IRC NR58 17in x 2.0 Tire
|
|
In Stock
|
|
|
Super Skinny tire if you are looking to break a spead record. Rated for 112mph!!
If you run this tire you have to run narrow inner tubes like
these
|
|
|
|
|
|
|
|
|
|
Moped Wheel Bearing Cup -35mm
|
|
In Stock
|
|
|
Bearing Cup for many different wheels. Mag, and wire.
Essential for when you are rebuilding your loose bearing rims.
35mm OD
40mm OD on Lip
14mm ID
15mm Thick
|
|
|
|
|
|
|
|
|
|
Heidenau K36 Moped Tire - 16 x 2.5in
|
|
In Stock
|
|
|
Great German tire company, making great tires for mopeds. Made in Germany, these are an all around well balanced tire. Sticky for the road with a vintage tread that helps keep your rubber side down.
These are a bit wide, so make sure your swing arm can accommodate it before you order.
|
|
|
|
|
|
|
|
|
|
Moped Wheel Bearing Cup -30mm
|
|
In Stock
|
|
|
Bearing Cup for many different wheels. Mag, and wire.
Essential for when you are rebuilding your loose bearing rims.
30mm OD
33.25mm OD on Lip
12.85mm ID
12.85mm Thick
|
|
|
|
|
|
|
|
|
|
Puch Snowflake Moped Wheel Bearing Cup -32.2mm
|
|
In Stock
|
|
|
Bearing Cup for many different wheels. Mag, and wire.
Essential for when you are rebuilding your loose bearing rims.
32.2mm OD
37.2mm OD on Lip
13.75mm ID
14mm Thick
|
|
|
|
|
|
|
|
|
|
Shinko SR714 TT 16 x 2.25in Tire
|
|
In Stock
|
|
|
This is a very high quality 16in tire. Fits many many Italian mopeds, and would be great for Tomos as well.
|
|
|
|
|
|
|
|
|
|
Shinko Goldenboy SR704 17 x 2.25in Tire
|
|
In Stock
|
|
|
The SR704 is designed as an OEM replacement for mopeds with 2.25-17 rear tires. Features include: - Tough nylon carcass
- 4 ply rated DOT approved
- L speed rating (75mph)
- Tube type
Shinko is a high quality tire manufacturer from Japan, they are just starting to break into the American market.
|
|
|
|
|
|
|
|
|
|
12mm Rear Loose Bearing Axle
|
|
In Stock
|
|
|
Rear loose bearing axle. OEM for a Sachs, but you can use it where ever it fits. This axle has the 22mm wide cone bearing.
|
|
|
|
|
|
|
|
|
|
12mm Rear Moped Axle
|
|
In Stock
|
|
|
Brand new rear axle for any moped with a 12mm axle.
|
|
|
|
|
|
|
|
|
|
11mm Front Axle Set
|
|
In Stock
|
|
|
11mm Grimeca front axle. Meant for loose ball bearing wheels.
works will all 11mm wheels that need an axle.
|
|
|
|
|
|
|
|
|
|
Puch Pedal Chain Tension Spring
|
|
In Stock
|
|
|
Same as the Puch Tension arm, but a spring. This is the tension arm that came on Puchs up to 1974. They work on all of them though.
Spring tech!
|
|
|
|
|
|
|
|
|
|
Motobecane Huret Speedometer Drive
|
|
In Stock
|
|
|
New Old Stock speedo drive for your Huret speedometer. Designed for MBK, but could work almost anywhere a Huret is needed. Includes some mounting goodies as well. Be sure to lube this drive before installing the cable. It has been sitting for a bit.
Made in France!
|
|
|
|
|
|
|
|
|
|
11mm Rear Moped Axle
|
|
In Stock
|
|
|
Brand new rear axle for any moped with a 12mm axle.
|
|
|
|
|
|
|
|
|
|
Heidenau K36 Moped Tire - 17 x 2.75in
|
|
In Stock
|
|
|
Great German tire company, making great tires for mopeds. Made in Germany, these are an all around well balanced tire. Sticky for the road with a vintage tread that helps keep your rubber side down.
These are a bit wide, so make sure your swing arm can accommodate it before you order.
|
|
|
|
|
|
|
|
|
|
Heidenau K56 Moped Tire - 17 x 2.5in
|
|
In Stock
|
|
|
Great German tire company, making great tires for mopeds. Made in Germany, these are an all around well balanced tire. Sticky for the track with a race tread that helps keep your rubber side down.
These are a bit wide, so make sure your swing arm can accommodate it before you order.
|
|
|
|
|
|
|
|
|
|
Shinko SR714 16 x 80/80
|
|
In Stock
|
|
|
A great street tire.
|
|
|
|
|
|
|
|
|
|
Heidenau K56 Moped Tire - 17 x 2.75in
|
|
In Stock
|
|
|
Great German tire company, making great tires for mopeds. Made in Germany, these are an all around well balanced tire. Sticky for the track with a race tread that helps keep your rubber side down.
These are a bit wide, so make sure your swing arm can accommodate it before you order.
|
|
|
|
|
|
|
|
|
|
Heidenau M3 Moped Tire - 16 x 2.25in
|
|
In Stock
|
|
|
Great German tire company, making great tires for mopeds. Made in Germany, these are an all around well balanced tire. Sticky for the road with a vintage tread that helps keep your rubber side down.
Would be perfect for a Tomos, or Italian moped.
|
|
|
|
|
|
|
|
|
|
Tomos A3 Mag Wheel Bearing Cup Set
|
|
In Stock
|
|
|
One set of bearing cups for your loose bearing Tomos A3 Mags.
|
|
|
|
|
|
|
|
|
|
Tomos A35 Brake Shoes
|
|
In Stock
|
|
|
Perfect brake shoes for perfect stopping. Sometimes brakes get worn down enough than no amount of sanding can bring them back. Little Tip: If your easy-adjust at the controls are all the way out, chances are your shoes are too far worn down, and should be replaced.
|
|
|
|
|
|
|
|
|
|
OEM Tomos A35/A55 Brake Shoes
|
|
In Stock
|
|
|
Nothing stops you better than new brake shoes. Except maybe disc brakes, but those aren't available..... Yet. Typically found on newer Tomos A35 and A55's. Fits Vespa mag and spoke wheels as well.
|
|
|
|
|
|
|
|
|
|
Shinko SR244 17 x 2.5in Knobby Tire
|
|
In Stock
|
|
|
On road off road shoes for your moped.
|
|
|
|
|
|
|
|
|
|
Tomos Revival, Streetmate, and Arrow Brake Shoes
|
|
In Stock
|
|
|
Tomos Revival, Streetmate, and Arrow Brake Shoes
|
|
|
|
|
|
|
|
|
|
Heidenau M3 Moped Tire - 17 x 2.25in
|
|
In Stock
|
|
|
Great German tire company, making great tires for mopeds. Made in Germany, these are an all around well balanced tire. Sticky for the road with a vintage tread that helps keep your rubber side down.
Would be perfect for a Puch, Peugeot, or Motobecane.
|
|
|
|
|
|
|
|
|
|
Heidenau K58 Moped Tire - 17 x 2.75in
|
|
In Stock
|
|
|
Great German tire company, making great tires for mopeds. Made in Germany, these are an all around well balanced tire. Sticky for the road with a vintage tread that helps keep your rubber side down.
The four season tires. Specifically designed for mopeds, through tread design and proper rubber composition, these tires deliver performance in the worst or best conditions.
|
|
|
|
